One-for-two smart mask machining
According to the "Contract Law of the People's Republic of China," the buyer the seller have signed an agreement on this purchase sale through equal negotiation through the purchase by the buyer to the seller the seller selling the equipment under this contract:
Equipment name, quantity, specification, model: Attachment "price list"
Name: One for two mask machine project + packaging machine
in advance, in one working day after the contract is confirmed, capitalized in;
After the equipment is completed, Seller will ship the goods after paying the balance of within 1 working day.
Go to factory training before delivery;
3.技術指標和供貨范圍：相關技術指標和供貨范圍見《工程報價明細》及技術協議，作為合同附件，是合同不可分割部分。Technical indicators scope of supply: For relevant technical indicators scope of supply, please refer to the "Details of Project Quotation" technical agreements. As an annex to the contract, it is an integral part of the contract
Delivery place: Seller
5.交付期限：收到合同款項全款后30天送到憑祥；設備交付是指甲方對乙方交付使用設備的規格、型號、數量、外觀、包裝的驗收。交付應由甲乙雙方或甲方與承運人履行交付手續。甲方對交付后的設備承擔毀損滅失的義務和風險。設備交付中發現規格、型號不對、數量短缺、外觀污毀、包裝損壞的，交付雙方應會簽記載，由乙方補救或協商處理。如甲方對收貨設備存在異議，須在收到貨物后次日起的1個工作日內向乙方提出書面函件，逾期視為按約完好收到貨物。Delivery period: 30 days after receiving the full payment of the contract sent to Pingxiang; Equipment delivery refers to the buyer's acceptance of the specifications, models, quantities, appearance packaging of the equipment delivered used by the seller. Delivery shall be performed by the buyer seller by the buyer the carrier. The buyer assumes the obligation risk of damage to the equipment after delivery. If the specifications models are found to be incorrect during the delivery of the equipment, the quantity is short, the appearance is fouled, the packaging is damaged, the two parties of the delivery shall sign the records the seller shall remediate negotiate to deal with them. If the buyer has any objection to the receiving equipment, he must submit a written letter to the seller within one working day the day after the receipt of the goods.
6.包裝方法、運輸和運費packing method, transportation freight:
The equipment under this contract shall be packed by the seller according to the following methods: wooden box simple packing, packing costs shall be borne by the seller；
The seller's packaging of the equipment shall be sufficient to withstand the mode of transport agreed upon in this contract protect the equipment damage；
Transportation method cost: For transportation by motor vehicle, the buyer shall pay the transportation cost；
The equipment shall be borne by the buyer after the equipment arrives at the buyer's factory。
Equipment installation commissioning, training acceptance：
Staff training scope, methods, training fees payment methods：
Training scope: operating methods, maintenance, troubleshooting methods；
Training method: live explanation demonstration；
7.1.3培訓內容：對買方操作工、維修工進行操作、保養、常見故障判斷及排除等方面知識的培訓Training content: training of buyers' operators maintenance workers in operation, maintenance, judgment troubleshooting of common faults；
主電源電壓（變動范圍應低于AC220V的+7%）Main power supply voltage (change range should be less than + 7% of AC220V)。
氣源壓力及流量不穩定，壓力低于0.5Mpa，氣源水分大，未能達到設備基本要求The gas source pressure flow are unstable, the pressure is lower than 0.5Mpa, the gas source moisture is large, fails to meet the basic requirements of the equipment。
8.質量保證及售后服務Quality assurance after-sales service：
The seller guarantees that the goods are made with the latest materials processes, are new, have been used, fully comply with the quality, specifications performance specified in the annex to this contract. The quality guarantee period is 1 year, except for man-made。
If the equipment fails during use, the seller's engineer provides technical support to the buyer through video, telephone, email。
9.違約責任Liability for breach of contract：
Under the conditions of the buyer's compliance, if the seller delays delivery, the seller shall pay to the buyer a late penalty of 0.1% of the total price of the goods each week, the number of late days less than one week shall be considered as one-week settlement, but the maximum shall exceed the delay Five percent (5%) of the total price of the goods; if the buyer delays the payment, the buyer shall pay the seller a penalty fee of 0.1% of the unpaid amount of the contracted goods every week. Weekly liquidation, but no more than five percent (5%) of the total price of the delayed delivery；
After the equipment is commissioned, the efficiency is at least 90 pieces per minute. If the efficiency is reached, the buyer has the right to choose a return the seller refunds the full payment。
Incidents of force majeure as stipulated in this contract that are unforeseen by either party at the time of signing this contract cannot be avoided affected by the affected party, have an impact on the performance of this contract；
If a force majeure event occurs, the contractual obligations of both parties A B affected by the event will be suspended during the delay period caused by force majeure；
When either party A B suffers force majeure, it shall promptly notify the other party, explaining that it needs to provide reasons for the occurrence of force majeure, shall provide appropriate proof of the occurrence duration of the force majeure event within 15 days thereafter；
In the event of force majeure, the two parties shall reach an agreement on the performance of this contract the termination of this contract.
The parties shall abide by the terms stipulated in this contract. If a dispute arises in the course of performance, it shall be settled in accordance with the principle of friendly negotiation. If a dispute arises in the understanding of the relevant terms of the contract, the true meaning of the terms shall be determined according to the purpose of the contract, transaction habits principles of good faith;
All disputes concerning the execution of the contract shall be settled through friendly negotiation between the two parties. If the two parties cannot resolve the dispute, the ruling shall be made in accordance with the relevant regulations of the Contract Law of the People's Republic of China, the people's court the contracting party is located shall exercise jurisdiction.
12.合同變更與轉讓Contract changes assignments：
Once this contract takes effect, neither party may change it at will, except for the written agreement reached between the two parties.
The Buyer shall transfer this contract without the consent of The Seller.
13.合同生效和期間Contract effective period
This contract must be sealed signed by both parties, it will take effect the date of the last party's seal signature; (fax WeChat are valid)
This contract terminates on the date when the matters agreed in this contract are processed.
The "written notice" in this contract the changes between the parties A B any other related matters can be delivered by the recipient by direct delivery, registered mail, express mail, fax, E-mail, WeChat to the other side.
一、 設備簡介 equipment introduction
1.1 設備概述Equipment Overview:
This machine is mainly used for the automatic forming of flat masks: the whole roll of fabric is driven by rollers after unwinding, the fabric is automatically folded hemmed; the entire length of the nose bridge is pulled unrolled, cut to length introduced into the hemmed fabric. Ultrasonic welding to the sealing, then ultrasonic side sealing, cutting with a cutter; conveying the mask to the two mask earband welding stations through the assembly line, finally forming the mask through ultrasonic welding; when the mask is made, it passes the assembly line Conveyed to flat belt line for collection.
Equipment diagram (This picture is for reference only, the equipment is subject to the actual product)
1.3 生產規格：Production Specifications
Standard type: disposable medical mask 175 * 95m
二、設備主要組成結構The main structure of the equipment
2.1設備的主要組成結構The main component structure of the device
2.2設備詳細介紹：Equipment detailed introduction
2.2.1 設備總覽圖介紹Introduction of equipment overview diagram
2.2.2 設備外觀尺寸圖Equipment appearance size chart
2.2.3 設備各工位詳細介紹Detailed introduction of each station of the equipment：
（1）原材料放料單元Raw material discharge unit
（2）分流輸送線單元Diversion conveyor line unit
（3）耳帶點焊單元Earband spot welding unit
2.2.4設備生產工藝流程說明 Equipment production process description
Raw materials—molding—nasal bridge fill—over—edge compression—mask body welding—slicing—conveying shunt—ear band welding—collection—packaging—sterilization—EO—finished products
In order to realize the above manufacturing process, our company is equipped with fully automatic production equipment. The full-automatic equipment is one-piece molding. One mask slicer two ear-spot spot welders can be automated raw material feeding to packaging completion.
Full automatic mask production line with one machine one machines Efficiency: 45-55pcs / min
Full automatic mask production line with one machine two machines Efficiency: 90-110pcs / min
三、設備技術參數Equipment technical parameters
3.1 設備的生產能力：Equipment production capacity
(1)Production efficiency: 80-110ppm;
(2)Qualification rate of equipment production: 98% -99% (except when the incoming materials do meet the requirements the employees' improper operation is excluded)
(3)Equipment failure rate: 3% (refers to the failure of the equipment itself)
3.2設備安裝與環境需求Equipment installation environmental requirements
（5） 壓縮空氣：0.5～0.7 MPa，使用流量約300L/min；
（1） Equipment size: 6500mm (L) × 4500mm (W) × 1900mm (H)；
（2） Appearance color: international standard warm gray 1C (win-win standard color), according to this standard without special instructions；
（3） Equipment weight: ≤5000kg, ground load ≤500KG / m2；
（4） Working power: equipment 220VAC ± 5 ﹪, 50HZ, rated power about 9KW；
（5） Compressed air: 0.5 ～ 0.7 MPa, using flow rate of about 300L / min；
（6）Operating environment: temperature 10 ～ 35 ℃, humidity 5-35% HR, no flammable corrosive gas, no dust (cleanness no less than 100,000).
四、設備常用配置要求Common equipment configuration requirements
4.1主要元器件配置清單Configuration list of main components
1. With three servo motors, the bag can be set cut immediately. It is necessary to adjust the air bag move in place, saving time film.
2. In the machine world, parameter setting is quick easy.
3. Fault diagnosis function, clear fault display.
4. Sensitivity photoelectric eye target tracking, digitizing the sealing cutting position of input output, making the sealing cutting position more accurate.
5.Temperature independent PID control, better suitable for various packaging materials.
6. Positioning stop function, no sticking, no waste of film.
7. The transmission system is simple, the operation is more reliable, the maintenance is more convenient.
8. All controls are realized by software, which facilitates function adjustment technology upgrade, keeps advanced.
Suitable for masks, cakes, cakes, snow cakes, custard pie, chocolate cakes, candy, bags, snacks, cakes, medicines, consumer goods, industrial parts, cartons
pallets other types of regular objects.
(三) 基本技術參數Main technical parameters:
①PLC和觸摸屏 PLC touch screen: Taiwan 臺灣
②光電開關 Photoelectricity switch： Yatai亞泰
③變頻器 Transducer： Yatai 亞泰
④按鈕 Push button： Delixi德力西
⑥溫控表 Temperature controller： Delixi德力西
⑦接近開關Approach switch： Delixi德力西